伐木工怎样砍树作文英语

As a lumberjack, the process of cutting down a tree is not as simple as it may seem. It requires skill, precision, and knowledge of the tree's anatomy. In this essay, I will walk you through the steps of cutting down a tree and the tools needed for the job.

The first step in cutting down a tree is to assess the tree's surroundings. It's essential to ensure that there are no obstacles in the way that could cause damage to property or injury to people. You should also look for any signs of decay or damage to the tree that could make it unstable.

Once you have assessed the tree's surroundings, the next step is to determine the direction in which you want the tree to fall. This is where the skill and precision come in. You need to analyze the tree's lean, shape, and weight distribution to determine the best direction for it to fall. You can use a plumb line and a level to help you

with this process.

After you have determined the direction in which the tree will fall, it's time to start cutting. The first cut, known as the notch, is made on the side of the tree in the direction you want it to fall. The notch should be a V-shape, with the bottom of the V being at a 90-degree angle to the direction of the tree's fall. This cut should be about one-third of the way through the tree.

The second cut is made on the opposite side of the tree, a few inches above the notch. This cut, known as the back cut, should be horizontal and meet the bottom of the notch. The back cut should be slightly higher than the notch to create a hinge that will help control the tree's fall.

Once the back cut is complete, the tree should start to fall in the direction of the notch. However, it's important to have an escape route planned in case the tree falls in an unexpected direction. As the tree falls, you should move quickly out of the way.

The final step is to cut the tree into manageable pieces. This is where the knowledge of the tree's anatomy comes in. You need to know where the branches and knots are located to avoid damaging the saw blade. You should also cut the tree into pieces that are small enough to be moved safely.

In conclusion, cutting down a tree is a complex process that requires skill, precision, and knowledge. As a lumberjack, I take pride in my ability to safely and efficiently cut down trees. With the right tools and techniques, cutting down a tree can be done safely and effectively.