(参考)产品详细信息表格

Component Specification SheetCustomer:

Client Item Number: Brief Description:Supplier :

Supplier Item Code:

Page: Date:

Spec. number:

Revision: Revision Date:

1 of 1

Component Material:

Outer CapInner cap /RodBottle

Aluminum POMPETPENylon

Dimension:

WiperBrush:

Assembly:Dia.12.66mm±0.2mm x 68.3mm±0.2mm HOut Cap:Dia:12.66mm ±0.20mmX 27.0mm±0.2mm HInner Cap/stem:Dia 3.7mm ±0.1mm(small end)x26.0mm±0.5mm LBottle:Dia:12.5mm ±0.20mmX 48.0mm±0.30mm H

Wiper:Dia:7.16mm ±0.08mmx12.4mm±0.50mm orific: Dia:3.45±0.10mm

Brush:20.0mm+1.0/-1.5mm L

Drawing No.:

Revision

Empty Component Weight:

Fill Capacity:Neck Gear Size:

Maximum Print Area:Color:

4.5g±1.2g(TBA)OFC:3.0ml±0.5mlT: Dia: 10.23mm±0.15mmX7.0mm+0.15mm/-0.1mm H

Bottle: 36.5mmW X 37.0mm Houter CapBottleWiperIner cap/RodBrush:

Shiny silver BlackBlackBlackBlack

Special Treatment:

Decoration / Color:Protocol Test:Function Spec.:

N/A

silver hot stamp on bottleS100

Production Capacity:

Packing Specifications:Inside Packing Method: Qty per Master Export Box:

Tray backCapBottleWiper

Cap opening torque force : 0.8--3.0kgf.cm .Cap Closing torque force: 3.0kgf.cm mini

Outer Cap / Inner Cap separation pull force- 4.0kgf min.Wiper / Bottle separation pull force:1.5kgf min.Brush & Stem separation force: 2kgf.mini

leakage pass by vacuum at 0.06Mpa for 10 minutesCap & base gap: 0.6 mm Max

3,430pcs/ctn; N.W.: 8.95kgs; G.W.:10.25kgs cuft 2.24,284pcs/ctn; N.W.: 9.0kgs; G.W.:10.27kgs cuft 2.248,000pcs / ctn; N.W.: 12.00kgs; G.W.: 12.90kgs cuft 1.8

Note: * wiper pack separartely*

Packing Requirements & Specifications

1. All Master Export Boxes must have a PE liner.

2. All glass must have protective inner barrier, between corrugated end components, to ensure against breakage.3. No mixed Master Export boxes.

4. Maximum weight per Master Export Box is 15 kg.5. Master Export Box marking must be as follows:

SIGNED & APPROVED BY :