CD4099BMS
December 1992
CMOS 8-Bit Addressable Latch
PinoutCD4099BMSTOP VIEWFeatures•High Voltage Type (20V Rating)•Serial Data Input•Active Parallel Output•Storage Register Capability•Master Clear•Can Function as Demultiplexer•100% Tested for Quiescent Current at 20V•5V, 10V and 15V Parametric Ratings•Standardized Symmetrical Output Characteristics•Maximum Input Current of 1µA at 18V Over Full Pack-age Temperature Range; 100nA at 18V and +25oC•Noise Margin (Over Full Package/Temperature Range)-1V at VDD = 5V-2V at VDD = 10V-2.5V at VDD = 15V•Meets All Requirements of JEDEC Tentative StandardNo. 13B, “Standard Specifications for Description of‘B’ Series CMOS Devices”Q7RESET1216VDD15Q614Q513Q412Q311Q210Q19Q0DATA3WRITE DISABLEA0A1A2VSS45678Functional DiagramApplications•Multi-Line Decoders•A/D ConvertersA0A1WRITE DISABLEDATA5674391011Q0Q1Q2Q3Q4Q5Q6Q78DECODER8 LATCHES12131415DescriptionCD4099BMS 8-bit addressable latch is a serial input, paralleloutput storage register that can perform a variety of functions.Data are inputted to a particular bit in the latch when that bitis addressed (by means of inputs A0, A1, A2) and whenWRITE DISABLE is at a low level. When WRITE DISABLE ishigh, data entry is inhibited; however, all 8 outputs can becontinuously read independent of WRITE DISABLE andaddress inputs.A master RESET input is available, which resets all bits to alogic “0” level when RESET and WRITE DISABLE are at ahigh level. When RESET is at a high level, and WRITE DIS-ABLE is at a low level, the latch acts as a 1 of 8 demulti-plexer; the bit that is addressed has an active output whichfollows the data input, while all unaddressed bits are held toa logic “0” level.The CD4099BMS is supplied in these 16-lead outline packages:Braze Seal DIPFrit Seal DIPCeramic FlatpackH4XH1FH6WA2RESETVDD = 16VSS = 821CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.1-888-INTERSIL or 321-724-7143|Copyright © Intersil Corporation 1999
File Number
3333
7-494
元器件交易网www.cecb2b.com
Specifications CD4099BMS
Absolute Maximum RatingsDC Supply Voltage Range, (VDD) . . . . . . . . . . . . . . .-0.5V to +20V(Voltage Referenced to VSS Terminals)Input Voltage Range, All Inputs . . . . . . . . . . . . .-0.5V to VDD +0.5VDC Input Current, Any One Input . . . . . . . . . . . . . . . . . . . . . . . .±10mAOperating Temperature Range. . . . . . . . . . . . . . . .-55oC to +125oCPackage Types D, F, K, HStorage Temperature Range (TSTG). . . . . . . . . . .-65oC to +150oCLead Temperature (During Soldering) . . . . . . . . . . . . . . . . .+265oCAt Distance 1/16 ± 1/32 Inch (1.59mm± 0.79mm) from case for10s MaximumReliability InformationThermal Resistance . . . . . . . . . . . . . . . .θjaθjcCeramic DIP and FRIT Package. . . . .80oC/W20oC/WFlatpack Package . . . . . . . . . . . . . . . .70oC/W20oC/WMaximum Package Power Dissipation (PD) at +125oCFor TA = -55oC to +100oC (Package Type D, F, K). . . . . .500mWFor TA = +100oC to +125oC (Package Type D, F, K) . . . . .DerateLinearity at 12mW/oC to 200mWDevice Dissipation per Output Transistor . . . . . . . . . . . . . . .100mWFor TA = Full Package Temperature Range (All Package Types)Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .+175oCTABLE1.DC ELECTRICAL PERFORMANCE CHARACTERISTICSGROUP ASUBGROUPS12VDD = 18V, VIN = VDD or GNDInput Leakage CurrentIILVIN = VDD or GNDVDD = 20312VDD = 18VInput Leakage CurrentIIHVIN = VDD or GNDVDD = 20312VDD = 18VOutput VoltageOutput VoltageOutput Current (Sink)Output Current (Sink)Output Current (Sink)Output Current (Source)Output Current (Source)Output Current (Source)Output Current (Source)N Threshold VoltageP Threshold VoltageFunctionalVOL15VOH15IOL5IOL10IOL15IOH5AIOH5BIOH10IOH15VNTHVPTHFVDD = 15V, No LoadVDD = 15V, No Load (Note 3)VDD = 5V, VOUT = 0.4VVDD = 10V, VOUT = 0.5VVDD = 15V, VOUT = 1.5VVDD = 5V, VOUT = 4.6VVDD = 5V, VOUT = 2.5VVDD = 10V, VOUT = 9.5VVDD = 15V, VOUT = 13.5VVDD = 10V, ISS = -10µAVSS = 0V, IDD = 10µAVDD = 2.8V, VIN = VDD or GNDVDD = 20V, VIN = VDD or GNDVDD = 18V, VIN = VDD or GNDVDD = 3V, VIN = VDD or GNDInput Voltage Low(Note 2)Input Voltage High(Note 2)Input Voltage Low(Note 2)Input Voltage High(Note 2)VILVIHVILVIHVDD = 5V, VOH > 4.5V, VOL < 0.5VVDD = 5V, VOH > 4.5V, VOL < 0.5VVDD = 15V, VOH > 13.5V,VOL < 1.5VVDD = 15V, VOH > 13.5V,VOL < 1.5V31, 2, 31, 2, 3111111111778A8B1, 2, 31, 2, 31, 2, 31, 2, 3LIMITSTEMPERATURE+25oC+125oC-55oC+25oC+125oC-55oC+25oC+125oC-55oC+25oC, +125oC, -55oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+125oC-55oC+25oC, +125oC, -55oC+25oC, +125oC, -55oC+25oC, +125oC, -55oC+25oC, +125oC, -55oC-3.5-111.5-4-VVVVMIN----100-1000-100----MAX10100010---100100010050-----0.53-1.8-1.4-3.5-0.72.8UNITSµAµAµAnAnAnAnAnAnAmVVmAmAmAmAmAmAmAVVVPARAMETERSupply CurrentSYMBOLIDDCONDITIONS(NOTE 1)VDD = 20V, VIN = VDD or GND+25oC, +125oC, -55oC14.950.531.43.5-----2.80.7VOH >VOL Specifications CD4099BMS TABLE2.AC ELECTRICAL PERFORMANCE CHARACTERISTICSGROUP ASUBGROUPSTEMPERATURE910, 11VDD = 5V, VIN = VDD or GND910, 11VDD = 5V, VIN = VDD or GND910, 11TPHL4TPLH4TTHLTTLHVDD = 5V, VIN = VDD or GND910, 11VDD = 5V, VIN = VDD or GND910, 11+25oC+125oC, -55oC+25oC+125oC, -55oC+25oC+125oC, -55oC+25oC+125oC, -55oC+25oC+125oC, -55oCLIMITSMIN----------MAX400540400540350473450608200270UNITSnsnsnsnsnsnsnsnsnsnsPARAMETERPropagation DelayData to OutputPropagation DelayWrite Disable to OutputPropagation DelayReset to OutputPropagation DelayAddress to OutputTransition TimeSYMBOLTPHL1TPLH1TPHL2TPLH2TPHL3CONDITIONS(NOTE 1, 2)VDD = 5V, VIN = VDD or GNDNOTES:1.CL = 50pF, RL = 200K, Input TR, TF < 20ns.2.-55oC and +125oC limits guaranteed, 100% testing being implemented.TABLE3.ELECTRICAL PERFORMANCE CHARACTERISTICSLIMITSPARAMETERSupply CurrentSYMBOLIDDCONDITIONSVDD = 5V, VIN = VDD or GNDNOTES1, 2TEMPERATURE-55oC, +25oC+125oCVDD = 10V, VIN = VDD or GND1, 2-55oC, +25oC+125oCVDD = 15V, VIN = VDD or GND1, 2-55oC, +25oC+125oCOutput VoltageOutput VoltageOutput VoltageOutput VoltageOutput Current (Sink)VOLVOLVOHVOHIOL5VDD = 5V, No LoadVDD = 10V, No LoadVDD = 5V, No LoadVDD = 10V, No LoadVDD = 5V, VOUT = 0.4V1, 21, 21, 21, 21, 2+25oC, +125oC,-55oC+25oC, +125oC,-55oC+25oC, +125oC,-55oC+25oC, +125oC,-55oC+125oC-55oCOutput Current (Sink)IOL10VDD = 10V, VOUT = 0.5V1, 2+125oC-55oCOutput Current (Sink)IOL15VDD = 15V, VOUT = 1.5V1, 2+125oC-55oCOutput Current (Source)IOH5AVDD = 5V, VOUT = 4.6V1, 2+125oC-55oCOutput Current (Source)IOH5BVDD = 5V, VOUT = 2.5V1, 2+125oC-55oCOutput Current (Source)IOH10VDD = 10V, VOUT = 9.5V1, 2+125oC-55oCMIN--------4.959.950.360.640.91.62.44.2------MAX515010300106005050---------0.36-0.64-1.15-2.0-0.9-1.6UNITSµAµAµAµAµAµAmVmVVVmAmAmAmAmAmAmAmAmAmAmAmA7-496 元器件交易网www.cecb2b.com Specifications CD4099BMS TABLE3.ELECTRICAL PERFORMANCE CHARACTERISTICS (Continued)LIMITSPARAMETEROutput Current (Source)SYMBOLIOH15CONDITIONSVDD =15V, VOUT = 13.5VNOTES1, 2TEMPERATURE+125oC-55oCInput Voltage LowInput Voltage HighPropagation DelayData to OutputPropagation DelayWrite Disable to OutputPropagation DelayReset to OutputPropagation DelayAddress to OutputTransition TimeVILVIHTPHL1TPLH1TPHL2TPLH2TPHL3VDD = 10V, VOH > 9V, VOL < 1VVDD = 10V, VOH > 9V, VOL < 1VVDD = 10VVDD = 15VVDD = 10VVDD = 15VVDD = 10VVDD = 15VTPHL4TPLH4TTHLTTLHTHVDD = 10VVDD = 15VVDD = 10VVDD = 15VVDD = 5VVDD = 10VVDD = 15VMinimum Data SetupTime Data to WriteDisableMinimum Pulse WidthDataTSVDD = 5VVDD = 10VVDD = 15VTWVDD = 5VVDD = 10VVDD = 15VMinimum Pulse WidthAddressTWVDD = 5VVDD = 10VVDD = 15VMinimum Pulse WidthResetTWVDD = 5VVDD = 10VVDD = 15VInput CapacitanceNOTES:1.All voltages referenced to device GND.2.The parameters listed on Table 3 are controlled via design or process and are not directly tested. These parameters are characterizedon initial design release and upon design changes which would affect these characteristics.3.CL = 50pF, RL = 200K, Input TR, TF < 20ns.CINAny inputs1, 21, 21, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2, 31, 2+25oC, +125oC,-55oC+25oC, +125oC,-55oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oC+25oCMIN---+7--------------------------MAX-2.4-4.23-15010016012016013020015010080150755010050352001008040020012515075507.5UNITSmAmAVVnsnsnsnsnsnsnsnsnsnsMHzMHzMHznsnsnsnsnsnsnsnsnsnsnsnspFMinimum Hold time Datato Write DisableTABLE4.POST IRRADIATION ELECTRICAL PERFORMANCE CHARACTERISTICSLIMITSPARAMETERSupply CurrentN Threshold VoltageSYMBOLIDDVNTHCONDITIONSVDD = 20V, VIN = VDD or GNDVDD = 10V, ISS = -10µANOTES1, 41, 4TEMPERATURE+25oC+25oCMIN--2.8MAX25-0.2UNITSµAV7-497 元器件交易网www.cecb2b.com Specifications CD4099BMS TABLE4.POST IRRADIATION ELECTRICAL PERFORMANCE CHARACTERISTICSLIMITSPARAMETERN Threshold VoltageDeltaP Threshold VoltageP Threshold VoltageDeltaFunctionalSYMBOL∆VTNVTP∆VTPFCONDITIONSVDD = 10V, ISS = -10µAVSS = 0V, IDD = 10µAVSS = 0V, IDD = 10µAVDD = 18V, VIN = VDD or GNDVDD = 3V, VIN = VDD or GNDPropagation Delay TimeTPHLTPLHVDD = 5V1, 2, 3, 4+25oCNOTES1, 41, 41, 41TEMPERATURE+25oC+25oC+25oC+25oCMIN-0.2-VOH >VDD/2-MAX±12.8±1VOL Specifications CD4099BMS TABLE8.BURN-IN AND IRRADIATION TEST CONNECTIONSOSCILLATORFUNCTIONStatic Burn-In 1Note 1Static Burn-In 2Note 1Dynamic Burn-In Note 1IrradiationNote 2NOTES:1.Each pin except VDD and GND will have a series resistor of 10K± 5%, VDD = 18V± 0.5V2.Each pin except VDD and GND will have a series resistor of 47K±5%; Group E, Subgroup 2, sample size is 4 dice/wafer, 0 failures,VDD = 10V± 0.5VOPEN1, 9-151, 9-15-1, 9-15GROUND2-885-88VDD162-7, 16162-7, 161, 9-152, 439V± -0.5V50kHz25kHzLogic DiagramA05*A0A0A16*A1A1A27*A2A2DATA3*DA1WDA1RESET2*RA1A0A2A0A2A1A1A1A0A2A0A2A0A2A0A2A0A2A0A2DWDRDWDRDWDRDWDRDWDRDWDRDWDRDWDRLATCH09Q0LATCH1LATCH210Q111Q2A1LATCH3LATCH412Q3WRITE DISABLE4*13Q4LATCH5LATCH614Q515Q6RADDRESSWDA1LATCH71Q7pDATAnQVDDpnVSS = 8VDD = 16VSS*ALL INPUTS ARE PROTECTEDBY CMOS PROTECTIONNETWORK7-499 元器件交易网www.cecb2b.com CD4099BMS MODE SELECTIONA070%30%70%30%WD00R0101ADDRESSEDLATCHFollows DataFollows DataUNADDRESSEDLATCHHolds PreviousStateReset to “0”A1A270%tW(Active High 8-Channel Demultiplexer)11Holds Previous StateReset to “0”R = ResetReset to “0”WDWD = Write DisableFIGURE 2.DEFINITION OF WRITE DISABLE ON TIMEA0, A1, A2tW8WRITE DISABLE4DATAtWtS6tW5tP2tP9Q7tPtP1tPtP3tPtH7RESETQ0Q7FIGURE 3.MASTER TIMING DIAGRAMA0A1A2A3DATA IN56743A0A1CD4099BMSA2WDDATAQ0Q1Q2Q3Q4Q5Q6R2VDDQ791011121314151DO 1DO 2DO 3DO 4DO 5DO 6DO 7DO 8DATACD4099BMSQ0DQ1Y1/4 CD4016IN/OUT01230567A0A1CD4099BMSA2WDDATAQ0Q1Q2Q3Q4Q5Q6R2VDDQ791011121314151DO 9DO 10DO 11DO 12DO 13DO 14DO 15DO 16A0A1A2A3S0WDRCD4099BMSDS5S1S21XIN/OUT2**1/6 CD406943WDWDWDRQ153FIGURE 4.1 OF 16 DECODER/DEMULTIPLEXERFIGURE 5.MULTIPLE SELECTION DECODING - 4 x 4 CROSSPOINT SWITCH7-500 元器件交易网www.cecb2b.com CD4099BMS VDDt254ASTC17891261429101516CD4520Q2A46A1Q3A57A22R7VDDCD4047R2330Ω100kΩOSC13OUTR-C31CLOCKQ1A354389WDA0470pF(t1 < t2)t1STARTCONVERSIONCD4099BMSRDATAQ0Q1Q2Q3Q4Q5Q6Q791011121314151*1012LSB*3121356*VDD11CD4099BMSOUTPUTSTO DISPLAY*4710kΩ+312OUT856pF10kΩ16R2RLADDER NETWORK**9101112132345678MSB64CA3130-51100kΩ*CD4001**HYCOMP HC210SLD-2ROR EQUIVALENTANALOGINFIGURE 6.A/D CONVERTERTypical Performance CharacteristicsOUTPUT LOW (SINK) CURRENT (IOL) (mA)OUTPUT LOW (SINK) CURRENT (IOL) (mA)AMBIENT TEMPERATURE (TA) = +25oCAMBIENT TEMPERATURE (TA) = +25oC302520151050GATE-TO-SOURCE VOLTAGE (VGS) = 15V15.012.510.07.55.02.505V51015DRAIN-TO-SOURCE VOLTAGE (VDS) (V)10VGATE-TO-SOURCE VOLTAGE (VGS) = 15V10V5V51015DRAIN-TO-SOURCE VOLTAGE (VDS) (V)FIGURE 7.TYPICAL OUTPUT LOW (SINK) CURRENT CHARACTERISTICSFIGURE 8.MINIMUM OUTPUT LOW (SINK) CURRENTCHARACTERISTICS7-501 元器件交易网www.cecb2b.com CD4099BMS Typical Performance Characteristics (Continued)DRAIN-TO-SOURCE VOLTAGE (VDS) (V)-15-10-5AMBIENT TEMPERATURE (TA) = +25oCGATE-TO-SOURCE VOLTAGE (VGS) = -5V00-5-10-15-10V-20-25-15V-30OUTPUT HIGH (SOURCE) CURRENT (IOH) (mA)DRAIN-TO-SOURCE VOLTAGE (VDS) (V)-15-10-5AMBIENT TEMPERATURE (TA) = +25oCGATE-TO-SOURCE VOLTAGE (VGS) = -5V-500OUTPUT HIGH (SOURCE) CURRENT (IOH) (mA)-10V-10-15V-15FIGURE 9.TYPICAL OUTPUT HIGH (SOURCE) CURRENTCHARACTERISTICSPROPAGATION DELAY TIME (tPLH, tPHL) (ns)AMBIENT TEMPERATURE (TA) = +25oCFIGURE 10.MINIMUM OUTPUT HIGH (SOURCE) CURRENTCHARACTERISTICSAMBIENT TEMPERATURE (TA) = +25oCTRANSITION TIME (tTHL, tTLH) (ns)3002502001501005015V010203040506070809010010VSUPPLY VOLTAGE (VDD) = 5V200SUPPLY VOLTAGE (VDD) = 5V15010010V505VLOAD CAPACITANCE (CL) (pF)0020406080100LOAD CAPACITANCE (CL) (pF)FIGURE 11.TYPICAL PROPAGATION DELAY TIME (DATA TO Qn)vs LOAD CAPACITANCEPOWER DISSIPATION PER GATE (PD) (µW)6424242424242FIGURE 12.TYPICAL TRANSITION TIME vs LOADCAPACITANCEAMBIENT TEMPERATURE (TA) = +25oCLOAD CAPACITANCE (CL ) = 15pFCL = 50pFSUPPLY VOLTAGE (VDD) = 15V10V10V5V105610461036102610161001002468101102103ADDRESS CYCLE TIME (µs)2468246824681042468105FIGURE 13.TYPICAL DYNAMIC POWER DISSIPATION vs ADDRESS CYCLE TIME7-502 元器件交易网www.cecb2b.com CD4099BMS Chip Dimensions and Pad LayoutDimensions in parenthesis are in millimeters and arederived from the basic inch dimensions as indicated.Grid graduations are in mils (10-3 inch).METALLIZATION:PASSIVATION:Thickness: 11kÅ−14kÅ, AL.10.4kÅ - 15.6kÅ, SilaneBOND PADS:0.004 inches X 0.004 inches MINDIE THICKNESS:0.0198 inches - 0.0218 inchesAll Intersil semiconductor products are manufactured, assembled and tested underISO9000 quality systems certification.Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design and/or specifications at any time withoutnotice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurateand reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties whichmay result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.For information regarding Intersil Corporation and its products, see web sitehttp://www.intersil.comSales Office HeadquartersNORTH AMERICAIntersil CorporationP. O. Box 883, Mail Stop 53-204Melbourne, FL32902TEL:(321) 724-7000FAX: (321) 724-7240EUROPEIntersil SAMercure Center100, Rue de la Fusee1130 Brussels, BelgiumTEL: (32) 2.724.2111FAX: (32) 2.724.22.05ASIAIntersil (Taiwan) Ltd.Taiwan Limited7F-6, No. 101 Fu Hsing North RoadTaipei, TaiwanRepublic of ChinaTEL: (886) 2 2716 9310FAX: (886) 2 2715 3029File Number 503 因篇幅问题不能全部显示，请点此查看更多更全内容